WET & DRY VACUUM CLEANER
WET & DRY VACCUM CLEANER is to save money, right time ,place and energy for the user and this vacuum is also safe to use at workplace and home. Its a super easy to Maintenance.
ADVANTAGE
1.MOTOR POWER 240 V (STABLE)
2.VACCUM SUCTION HOLE MORE BIGGER AND ITS LOW RISK TO STUCK OR STUFFED WHILE OPERATION MODE
 
WHO CAN BE USED
1.CAR WASH AND DETAILING SHOP
2.HOME APPLAINCES
3.CLEANERS CONTRACTOR
4.BARBER SHOP
 
 
SPEFICATION：
Model : ZD10 Series
Voltage Rating : 110 -120V ~/220 -240V ~
Rated Frequency : 50/60Hz
Rated Input Power : 1800W
Maximum Suction : 22kpa
 
 
WHAT INSIDE BOX
1. BRUSH = 01 UNIT
2.FLAT SUCTION NOZZLE = 01 UNIT
3.EIBULOUS FLOOR BRUSH = 01 UNIT
4.LONG LINK PIPE = 02 UNIT
5.FILTER BAG = 01 UNIT
6.TUBE = 01 UNIT
7.ROLLER/WHEEL = 4 UNIT
8.VACUUM = 01 UNIT
 
 
How to Use as DRY VACUUM
1.Make sure fix the ''FILTER BAG'' inside Vacuum Container
2.Connect the Suction Pipe with the hole was located on middle of Vacuum Container
3.Install accessory tools needed on Suction tube
4.Power ''ON''
- Insert the plug into socket
-Turn "ON" the switch
5.Can ''Start'' to Vacuum
 
 
How to use as WET Vacuum
1.Make sure take out FILTER BAG in Vacuum Container
2.Connect the Suction Pipe with the hole was located on middle of Vacuum Container
3.Install accessory tools needed on Suction tube
4.Power ''ON''
- Insert the plug into socket
-Turn "ON" the switch
5.Can ''Start'' to Vacuum as WET VACCUUM
Note :a long link pipe can be used if the user needs to extend the length of the tube ,by attaching a suction tube and then attaching an cleaning accessory to the end of pipe
 
Maintenance and Cleaning Vacuum Container
1.CLEANING
-After using the vacuum cleaner or if you find the vacuum power is decreasing/slow( due to overload of dust in the container),please turn off the power supply and then open the container.
i) Unlock and open the lid
ii)Take out the filter bag and clear the dust in the container.
iii)Put the filter bag back to an original position and close the lid.
Make sure the power switch and the inlet opening are facing the same direction.
2. MAINTENANCE
-Use a warm water to clean the serious filter bag , you may clean with neutral cleaning detergent when its necessary.
i) Take out the filter bag
ii)Clean it
iii)Dry it before re-use again.