SNOW FOAM TANK  304 STANDARD STEEL 90L[ MAKE FOAM AT CAR WASH SHOP ]

SNOW FOAM TANK 304 STANDARD STEEL 90L[ MAKE FOAM AT CAR WASH SHOP ]

RM450.00Price

Stainless steel washing machine, foam machine, foam machine, car wash machine, washing machine, foam plastic machine for snow 90L
Accessories for foam rubber: inlet valve, pressure regulator, pressure gauge, plus valve, foam production valve, quiet valves, hoses, drain valve, foam valve.

Now we are all made of copper valves, plastic valves in addition to the outer drum.

Capacity: 90 L

Use of pump: 1-1.5 kg (1.5)

Working pressure: less than or equal to 0.01 MPa

Tank material: 304 stainless steel 

Valve Material: Brass Ball Valve

Package Size: 45 * 39 * 80 cm

Packing: 1 pc.

Weight: 12 kg

Instructions: Open the inlet valve by adding a dislocation of good liquid water wax. Close the inlet valve and gun, and then use Quick Connectors to connect compressed air. More work is done, connected to compressed air, etc. operating pressure up to 2 bar. Open the valve to spray water wax, spray distance and spray methods can be used to control the pressure and gun.

 Note: This product regulator has a factory pressure of 2 bar; if not necessary, do not arbitrarily transfer under air pressure. 2 bar use pressure, discharge the best results.

 The main reasons for troubleshooting, if you open the valve when the gun enters anhydrous wax, may be: there is no gas in the gas source; water liquid bottom wax;

 This equipment is regularly checked for leaks, if any, should be overhauled immediately.

Always check the connection of the hose tightly, the device should always use a towel to clean the surface to keep the equipment clean, used equipment is possible after discharging a transparent liquid bucket and placing in the shade to avoid barrel corrosion, affects normal use.

 Note: Before using the equipment, please read these instructions, training for qualified rear operational use. Do not smoke near equipment.

Please adjust the gun when using distance to avoid accidents.

Do not use poor quality water, liquid wax to maintain equipment in the oil valve, rubber and other parts of life and the cleaning effect.

Bubble machine design, thin bubbles, uniform, low efficiency, easy to move. In favor of the car wash beauty industry.

 Instructions for use:

1 open plus valve and exhaust valve, adding 90 liters of water, then add 1100 ml detergent (Note: If this is your first time, plus the best 1300 ml detergent)

 (2) close the valve and exhaust valve plus, close the gun valve switch, and then connect the compressed air to the quick connector

3 the above work is ready, the switch is in the open air, until the pressure rises to 0.09mpa, open the gun valve switch, you can spray foam